Shovel-Head.com

Hi Christian - das Budget für den Trip ist ja nicht mal so easy zu wuppen für nen Normalbürger.
Flug und Fracht roundtrip wird sicher nicht unter fünf großen Zetteln zu machen sein.
Unterkunft für den Kiwi könnte man ja mit PreEvo-coutchcrashing organisieren.

Ich würd dem Macker das mit 20€ sponsoren und falls da nun nur noch 250 von uns (oder ein paar Wohlhabende hier sind spendabel) hier mitmachen, hätten wir das mit der weitesten Anfahrt zu Gerry´s Jubiläumsparty next year auch schon mal geklärt ;-))))

Tip das mit dem Pokal für "Nice Bike" wäre auch von der Wiese und vielleicht kicken die von "down under" ja auch 30 Mal die Minute.

Bekloppte Idee - oder?

Gruß vom Feldrand! Maruski

Hi Maruski,

20 €, bin ich dabei. Den Zossen will ich in Natura sehen!

Gruß, Christian

@selectedgrub:

Just in case you can't follow the German babble these guys started, they're colleting coins to fly you and the sled into Germany for next year's PEP. The estimate says 5k, we've got 60 so far. Anyone else? Just 4940€ to go.

Hellmann Worldwide Logistics runs offices in Auckland, Wellington and Cristchurch, so we're set. You ain't getting out of this one, now

Fabulous work, by the way. Keep those pictures coming!

Regards,
KayTee

Ein sehr starkes Moped,das würde ich auch gern in Echt sehen.
Wo ist die Spenden Annahmestelle?
Ich spende nen Fuffi.
Gruß Karl

Bin dabei !
20 Kracher von meiner Seite.

Diese Showkisten sehen zwar sehr gut aus aber laufen tun sie meist nicht. Zumindest nicht auf Langstrecke.
Kenne diese Öfen zur Genüge

@Selectedgrub
Pitched my few coins in !
I wanna see this artwork cause usually this type of bikes won`t make it to the next gas-station.
Proof me wrong !


foul-language-rainer

Thanks for the welcomes and feedback!!

KayTee hat geschrieben:@selectedgrub:

Just in case you can't follow the German babble these guys started, they're colleting coins to fly you and the sled into Germany for next year's PEP. The estimate says 5k, we've got 60 so far. Anyone else? Just 4940€ to go.

Hellmann Worldwide Logistics runs offices in Auckland, Wellington and Cristchurch, so we're set. You ain't getting out of this one, now

Fabulous work, by the way. Keep those pictures coming!

Regards,
KayTee

Thanks but are they mad?

selectedgrub hat geschrieben:Thanks for the welcomes and feedback!!

KayTee hat geschrieben:@selectedgrub:

Just in case you can't follow the German babble these guys started, they're colleting coins to fly you and the sled into Germany for next year's PEP. The estimate says 5k, we've got 60 so far. Anyone else? Just 4940€ to go.

Hellmann Worldwide Logistics runs offices in Auckland, Wellington and Cristchurch, so we're set. You ain't getting out of this one, now

Fabulous work, by the way. Keep those pictures coming!

Regards,
KayTee

Thanks but are they mad?

What do you mean, "they"? We're all spending countless hours and heaps of money on old motorcycles, of which the paperwork alone would buy a modern efi'ed Japbike with twice the power ...

"Sane", "normal", "reasonable" and so on are not the first adjectives to come to ones mind when describing this, are they?

So, are you willing to fly-in or yes?

We'll just keep on passing the piggy-bank around, then

How do you fit those brass rivet thingies?

Regards,
KayTee

The offer blows me away, is nice and makes me feel uncomfortable.
I'll wait until it's done but thanks for the nice offer.

Several rivets types but the brass ones are wood screws screwed in cut down and peened over. The brass speed holes are eyelets cut down and peened over.

Boss für die Steuerung



Versuchte Bildung der Querträger ist es immer noch hässlich.
Ich weiß nicht warum square bar verwendet

Beenden Sie die Details auf Tank

Awesome!

Smashing!

Keep on (moving and posting pics!)





Christian

dear selected,


nice work really. I just wondered if you did the speedometer whole fixed or is there a rubber hose in between the tube and the tank?

thanks for an wanswer and keep on.

all the best
tom

Thankyou for the nice comments Christian and Tom.

Tom the cup is sealed and doesn't go right through.
A tube welded into the bottom of the speedo cup exiting through the tunnel. Just enough to get the speedo ferrule through.
One piece bottom.

Thanks!!

3 mal zu meiner Schieberegler für Penetrationstests.
Ich habe ein Zertifikat für den Ingenieur nun.

Ich glaube nicht, dass es herunterfällt.

Ich fing an, mein Öl Warnleuchte